교정용 와이어의 비틀림 모멘트
Torsional moment of orthodontic wires
최광철, 김경호, 송철규, 강창수,
소속 상세정보
최광철 ( ) - 연세대학교 치과대학 교정학교실
김경호 ( ) - 연세대학교 치과대학 교정학교실
송철규 ( ) - 연세대학교 치과대학 교정학교실
강창수 ( ) - 연세대학교 치과대학 교정학교실
KMID : 0361920000300040467
Abstract
As a rectangular wire is inserted into edgewise brackets the wire exerts a force system three-dimensionally. The force system may include bending force in first and second orders and a torsional force in third order. Analytical and experimental studies on bending force have been introduced, but information about torsion is still lack. The purpose of this study was to estimate the torsional´moment in the force system of rectangular arch wires through theoretical and experimental studies. Wires most frequently used for third order control were selected as study materials. Cross sections of 0.016X17.022, 0.0174.025, 0.0194.025 inch rectangular wires in four different materials such as stainless steel (O mco), TMA (Ormco), NiTi (Ormco), and braided stainless steel (DentaFlex, Dentaurum) were used. The torque/twist rate of each test material was calculated using the torsion fotiuula Torque/twist rate, yield torsional moment, and ultimate torsional moment were measured with a torque gauge. The torsion formula assesses that the torque,/twist rate (T/0) is proportional to the characteristics of material (G) and cross section (J), and is inversely proportional to the length of wire (L). Most experimental results conesponded with the formula. The relative stiffness was calculated for reference to a logical sequence of wire changes.
키워드
생역학;항복 비틀림 모멘트;최대 비틀림 모멘트;비틀림 강성;biomechanics;torsion;yield torsional moment;ultlmate torsional moment;torque/twist rate
원문 및 링크아웃 정보
등재저널 정보