인산염계 주형재와 치과주조용 Ti-Zr-Cr계 합금의 계면반응
Surface Reaction between Phosphate bonded Investment and Ti-Zr-Cr based Alloy for Dental castings
정종현, 주규지,
소속 상세정보
정종현 ( Jung Jong-Hyun ) - 광주보건대학교 치기공과
주규지 ( Joo Kyu-Ji ) - 비젼치과기공소
KMID : 0362120050270010073
Abstract
The surface-reacted layer of titanium castings greatly affects their mechanical properties. This study analyzed the interfacial zone of Ti-20%Zr-5%Cr alloy castings obtained from phosphate bonded investment and examined the relationship between the surface-reacted layer and hardness. The Vickers hardness of cast disks were tested at 20 ㎛ intervals from the surface to 120 ㎛ in depth. The cross-section was observed metallurgically, and line profile of the reacted layer was conducted under the EDX. The surface-reacted layer of Ti-20%Zr-5%Cr alloy is showed a similar tendency to Ti-6%Al-4%V alloy in thickness, and also Si diffusion in multiple reacted layer of Ti-20%Zr-5%Cr alloy is less than cp Ti and similar to Ti-6%Al-4%V alloy. The Vickers hardness in the surface layer was greater than in the inner part, and the Vickers hardness of Ti-20%Zr-5%Cr alloy ranged 650 to 390 and cp Ti ranged 810 to 160, Ti-6%Al-4%V alloy ranged 710 to 530 respectively.
키워드
Surface-reacted layer;phosphate bonded investment;Vickers hardness;EDX
원문 및 링크아웃 정보
등재저널 정보