금속소부도재관용 Ni-Cr 합금에 첨가된 Nb이 계면특성에 미치는 영향
A study on interfacial characteristics of Ni-Cr alloy by Nb content for Porcelain Fused to Metal Crown
김치영, 최성민,
소속 상세정보
김치영 ( Kim Chi-Young ) - 부산가톨릭대학교 보건과학대학 치기공학과
최성민 ( Choi Sung-Min ) - 인제대학교 의용공학과
KMID : 0362120050270010097
Abstract
The effect of Nb on interfacial bonding characteristics of Ni-Cr alloy for porcelain fused to metal crown (PFM) has been studied in order to investigate oxide layer. A specimens , which is 0.8 in thickness, were fired at 1,000 with four tests such as air, vacuum, air for 5 minutes and vacuum for 5 minutes in order to examine an oxide behavior of alloy surface generated by the adding of Nb to be controlled at a rate of 0, 1, 3 and 5. It observed oxide film form of the fired specimens with optical microscope and scanning electron microscope (SEM), and chemical formation of them with energy disperse X-ray spectroscopy (EDX). The other specimens, which is 2 in thickness, were fired at 1,000 with air and vacuum in order to analyze the diffusion behaviors of alloy-porcelain interface by X-ray dot mapping. The results of this study were as follows: 1. The observation of microstructure of specimens by SEM showed that the more Nb content is
high, the more much intermediate compound of rich Nb is observed. 2. The surface morphology of oxide film is most dense in 3% Nb. The heat treatment in air constitutes denser oxide film than heat treatment under vacuum. 3. The diffusion behavior of oxide layer by X-ray dot mapping showed that Si, Al of porcelain diffuse toward metal.
키워드
Ni-Cr alloy for PFM;Nb(niobium);oxide film;interfacial diffusion
원문 및 링크아웃 정보
등재저널 정보