SLM법으로 매크로 육각다공질 구조를 부여한 치과 임플란트의 역학 분석
Mechanical Analysis of Macro-Hexagon Porous Dental Implant Using Selective Laser Melting Technique
김부섭, 최성민,
소속 상세정보
김부섭 ( Kim Bu-Sob ) - 부산가톨릭대학교 보건과학대학 치기공학과
최성민 ( Choi Sung-Min ) - 부산가톨릭대학교 보건과학대학 치기공학과
KMID : 0362120110330010055
Abstract
Purpose: In this study, FEM(Finite Element Method) and bending strength test was conducted using normal implant and porous implant for the mechanical estimation of porous dental implant made by SLM method. Methods: Mechanical characteristics of PI(porous implant) and NI(normal implant) applied distributed loads(200N, 500N) were observed through FEM analysis. And each bending strength was gotten through bending test using MTS(Mechanical Test System, Instron 8871). Results: The result of FEM analysis was observed that stress difference between upper and surface of PI was 12 times, while NI was 2 times. The result of bending test was observed that bending strength of PI was lower than NI. we made a decision about this result that cross-sectional area of NI was larger than the PI. Conclusion: The stress shielding ability of porous implant was better than normal implant through result of FEM analysis. And bending strength of porous implant was lower than NI. We think that cause of this result was difference of cross-sectional area.
키워드
SLM; dental implant; mechanical analysis; macro-hexagon porous dental implant
원문 및 링크아웃 정보
등재저널 정보