치과 캐드캠 밀링장비에 따른 3본브릿지의 정확도 비교
The comparison of accuracy on three-unit fixed dental prosthesis made with CAD/CAM milling machines
배소연, 박진영, 김지환, 김혜영, 김명배, 김웅철,
소속 상세정보
배소연 ( Bae So-Yeon ) - 고려대학교 대학원 보건과학과
박진영 ( Park Jin-Young ) - 고려대학교 대학원 보건과학과
김지환 ( Kim Ji-Hwan ) - 고려대학교 대학원 보건과학과
김혜영 ( Kim Hae-Young ) - 고려대학교 대학원 보건과학과
김명배 ( Kim Myung-Bae ) - 대한치과CAD/CAM기공학회
김웅철 ( Kim Woong-Chul ) - 고려대학교 대학원 보건과학과
KMID : 0362120150370010009
Abstract
Purpose: The purpose of this study was to compare the accuracy of the maxillary three-unit fixed dental prosthesis (FDPs) made using two CAD/CAM milling machines : DCM Group(Dentaim CAD/CAM milling machine), WCM Group(Wieland CAD/CAM milling machine).
Methods: Each of 10 duplicate models was scanned by blue light scanner(Identica, Medit, Korea), and the three-unit FDPs (STL file) was designed using DelcamCAD. A total of 20 three-unit FDPs was fabricated, comprising 2 groups of 10 specimens each (shrinkage ratio is 1:1). The first three-unit FDPs STL file was used as a CAD reference model (CRM). Obtained STL files by scanning the inner surface of three-unit FDPs were convened into the point clouds-ASC II files. Discrepancies between the point clouds and CRM were measured by superimposition software. Statistical methods to analyze the data were used non-parametric method. The mean (SD) values were compared by a Mann-Whitney U-test. Type one error rate was set at 0.05.
Results: WCM group had small discrepancies with 2.17μm of mean value compared to 4.44μm in DCM group. The accuracy values between the two groups showed a sratistically significant difference (Table 2, p<.05).
Conclusion: The accuracy of the three-unit fixed dental prosthesis(FDPs) made of two CAD/CAM milling machines were statistically different. Accuracy with which the prosthesis made of WCM group was superior.
키워드
Dental CAD/CAM system; Accuracy; Three-dimensional superimposition analysis
원문 및 링크아웃 정보
등재저널 정보