연성 의치이장재의 온성방식이 경화반응 속도와 쇼어 경도에 미치는 영향
Effects of the Curing Methods of the Soft Denture Lining Materials on Setting Rate and Shore A Hardness
안현정, 한옥성, 김지우, 김민강, 송호준, 양홍소, 박영준,
소속 상세정보
안현정 ( Ahn Hyun-Jeong ) - 울산과학대학 치위생과
한옥성 ( Han Ok-Sung ) - 전남대학교 치의학전문대학원 치과재료학교실
김지우 ( Kim Ji-Woo ) - 전남대학교 치의학전문대학원 치과재료학교실
김민강 ( Kim Min-Kang ) - 전남대학교 치의학전문대학원 치과재료학교실
송호준 ( Song Ho-June ) - 전남대학교 치의학전문대학원 치과재료학교실
양홍소 ( Yang Hong-So ) - 전남대학교 치의학전문대학원 치과보철학교실
박영준 ( Park Young-Jun ) - 전남대학교 치의학전문대학원 치과재료학교실
KMID : 0362220100370030191
Abstract
The purpose of this study was to evaluate the setting rate and time-dependent Shore A hardness changes of
the silicone-based resilient denture lining materials (Self-curing: Mucosoft®, Sofreliner® Tough M; Heat-curing:
Mucopren® soft, Molloplast® B). The setting behaviors of the resilient denture liners (RDL) were evaluated
using an oscillating rheometer. For Shore A hardness test, disc-shaped RDL specimens (D 35 × T 6 mm) were
fabricated in aluminum molds. Shore A hardness was determined after 1 day and 28 days of water storage at
37±1℃ and measured using a shore A durometer. Within self-cured RDL groups, Sofreliner Tough M showed
slower c u ring r ate compared t o that o f Mu cosoft as s hown w ith their scorch t ime as 3 a nd 2 m inu tes,
respectively. Their setting time was about 5 min, which is similar to that of the manufacturers’ recommended
curing time. They showed similar flexibility with a resistance torque value as about 12 lb·in. Heat-cured RDLs
(Mucopren® soft and Molloplast® B) showed significantly higher torque values (16.5 and 19.4 lb·in, respectively)
comparing to those of self-cured RDLs (p<0.05). All the RDLs tested in this study could be classified
a s ISO Type A ( soft), and t he S hore A h ardness valu es o f the heat-cured material (Molloplast® B,
Mucopren® soft) were significantly higher than those of the self-cured material (Mucosoft®, Sofreliner® Tough
M)(p<0.05). For all the tested RDL groups, the hardness values measured after 28 days of water storage were
similar with those measured after 1 day of water storage (p>0.05). There was a positive correlation between
resistance t orqu e valu es a nd 2 4h-5s Shore A hardness valu es [ r= 0 .80, p= 0.20; resistance torque =
0.82×(Shore A hardness value) - 14.11]
키워드
Curing condition; Resilient denture liners; Setting behavior; Shore A hardness
원문 및 링크아웃 정보
등재저널 정보