아크리릭 레진 의치상 강화에 관한 실험적 연구
An experimental study on reinforcement of acrylic resin denture base
김형식, 김창회, 김영수,
소속 상세정보
김형식 ( Kim Hyung-Sik ) - 서울대학교 치과대학 치과보철학교실
김창회 ( Kim Chang-Whe ) - 서울대학교 치과대학 치과보철학교실
김영수 ( Kim Young-Soo ) - 서울대학교 치과대학 치과보철학교실
KMID : 0362419940320030411
Abstract
The denture may be fractured accidentally by an impact while outside the mouth, or may be cracked or broken while in service in the mouth. The latter is generally a fatigue failure caused by repeated flexure over a period of time. This investigation compared the flexural fatigue resistance, the impact force and the transverse strength of two denture base materials with and without the grid strengthener, the T300, the T800 and the Kevlar fiber to evaluate the fracture resistance. The distribution and behavior of fibers across fracture lines were examined by Hi-Scope Compact Microvision System. @ES Through analyses of the data from this study, the following conclusions were obtained: @EN 1. The flexural fatigue resistance, impact strength and transverse strength of high impact strength resin were higher than those of conventional heat polymerizing resin, but statistically there was no significant difference(p>0.05). 2. All specimens with and without the grid strengthener did not show significant differences in the flexural fatigue, the impact and the transverse strength test(p>0.05). 3. All specimens reinforced with the T300, the T800 and the Kevlar fiber showed significant increase of the fatigue resistance and the impact force(p<0.05). 4. All specimens reinforced with the T800 and the Kevlar fiber showed significant increase of the transverse strength(p<0.05). 5. All specimens reinforced with the T300, the T800 and the Kevlar fiber exhibited greenstick fractures. The fibers tended to remain enveloped in the resin, resisting pull-out.
키워드
원문 및 링크아웃 정보
등재저널 정보