강화형 치관용 복합레진의 인장강도에 관한 연구
A STUDY ON THE TENSILE STRENGTH OF REINFORCED VENEERING COMPOSITE RESINS FOR CROWN
안승근, 강동완,
소속 상세정보
안승근 ( Ahn Seung-Geun ) - 전북대학교 치과대학 보철학교실
강동완 ( Kang Dong-Wan ) - 조선대학교 치과대학 보철학교실
KMID : 0362420000380020226
Abstract
Recently a new generation of crown and bridge veneering resins containing submicron glass fillers was introduced. These ultrasmall particle hybrid composite materials distinguish themselves, compared with conventional microfill crown and bridge resins, through improved mechanical properties. It is claimed that these composites are suitable for metal free crowns and even bridges using fiber reinforcement. The purpose of this study was to evaluate the effect of thermal cycling on the tensile strength of the following veneering composites: Artglass(Heraeus Kulzer Co., Wehrheim, Germany), Estenia(Kuraray Co., Japan), Sculpture(Jeneric Pentron Co., Wallingford, U.S.A.), and Targis(Ivoclar Co., Schaan Liechenstein). According to manufacturer’ s instructions, rectangular tensile test specimens measuring 1.5 x 2.0 x 4.5 mm were made using a teflon mold. Whole specimens were divided into two groups. One group was dried in a desiccator at 25C for 10 days, and another group was subjected to thermal cycling(10,000 x) in water(5/55 10. All test specimens were placed in a universal testing machine and loaded until fracture with a crosshead speed of 0.5mm/min. Weibull analysis and Tukey s test were used to analyze the data. The fracture surfaces of specimens were observed in SEM and the aliphatic C=C absorbance peak of Estenia and Targis resin was analyzed using Fourier transform infrared(FTIR) spectroscopy. Within the limitations imposed in this study, the following conclusions can be drawn 1. Both in drying condition and, thermal cycling condition, the highest tensile strength was observed in Estenia testing group(p<0.05). 2. The strength data were fit to single-mode Weibull distribution, and the Weibull modulus of all veneering composite resin specimens increased after thermal cycling treatment. 3. After thermal cycling test, the highest tensile strength was observed in the Estenia group, and the lowest value was observed in the Targis group. The tensile strength values showed the significant differences between each group(p<0.05). 4. The aliphatic C = C absorbance peak of Estenia and Targis resin was decreased after light curing, and there was no distinct change after thermal cycling.
키워드
Veneering composites;Tensile strength;Weibull analysis;FTIR
원문 및 링크아웃 정보
등재저널 정보