가압주사식 열가소성 의치상 레진과 이장 레진 간의 결합강도에 관한 연구
A Study on the Bond Strength of Reline Resin to Pressure Injection Type Thermoplastic Denture Base Resin
문태성, 전윤경, 전유진, 임장섭,
소속 상세정보
문태성 ( Moon Tae-Sung ) - 부산대학교 치과대학 치과보철학교실
전윤경 ( Jeon Yun-Kyung ) - 부산대학교 치과대학 치과보철학교실
전유진 ( Jeon You-Jin ) - 부산대학교 치과대학 치과보철학교실
임장섭 ( Lim Jang-Seop ) - 부산대학교 치과대학 치과보철학교실
KMID : 0362420020400010042
Abstract
The purpose of this study was to evaluate the bond strength of reline resin to pressure injection type thermoplastic denture base resin.The denture base resins used in this study were Hipolycarbonate(High Dental Co.,Japan),Acetal dental(Pressingdental s.r.l.,Repubblica di San Marino)of thermoplastic resin and Acron MC(GC Dental Industrial Co.,Japan)of heatcured resin.The reline resins used were Lucitone 199(Dentsply international Inc.,USA),Tokuso rebase(Tokuyama Corp.,Japan),and Lightdon-U(Dreve-Dentamid-Gmbh,Germany).The reline resins are representative of heat-cured,self-cured,and light-cured resin respectively.Bond strength was examined by use of a three-point transverse flexural strength test. The results were as follows:1.The bond strength of Lucitone 199 to Acron MC was the highest.2.The bond strengths of Lucitone 199 and Tokuso rebase to Hi-polycarbonate resulted in a value of approximately one half that of Lucitone 199 to Acron MC,and there were no significant differences between these and the bond strength of Tokuso rebase to Acron MC(p<0.05).3.The bond strengths of reline resins to Acetal dental were lower than those of reline resins to Hi-polycarbonate.4.For all base resins Lightdon-U showed lower bond strength than the other reline resins.
키워드
Thermoplastic resin; Polycarbonate; Polyacetal resin; Denture reline
원문 및 링크아웃 정보
등재저널 정보