티타늄의 표면처리 방법에 따른 저온소성도재와의 결합강도
EFFECT OF SURFACE MODIFICATION ON BOND STRENGTH IN TITANIUM-PORCELAIN SYSTEM
노성욱, 박상원, 양홍소, 방몽숙, 박하옥, 임현필,
소속 상세정보
노성욱 ( Roh Sung-Wook ) - 전남대학교 치의학전문대학원 치과보철학교실
박상원 ( Park Sang-Won ) - 전남대학교 치의학전문대학원 치과보철학교실
양홍소 ( Yang Hong-So ) - 전남대학교 치의학전문대학원 치과보철학교실
방몽숙 ( Vang Mong-Sook ) - 전남대학교 치의학전문대학원 치과보철학교실
박하옥 ( Park Ha-Ok ) - 전남대학교 치의학전문대학원 치과보철학교실
임현필 ( Lim Hyun-Pil ) - 전남대학교 치의학전문대학원 치과보철학교실
KMID : 0362420070450050589
Abstract
Statement of Problem: Titanium has many advantages of high biocompatibility, physical porperties, low-weight, low price and radiolucency, but it is incompatible with conventional dental porcelain due to titanium’s oxidative nature. Many previous studies have shown that they used the method of sandblast surface treatment prior to porcelain application, the researchs are processing about the method of acid etching or surface coating.
Purpose:The purpose of this research is to study the effect on bond strength between titanium and porcelain when using macro-surface treatment and micro-surface treatment and macro and micro surface treatment.
Material and Methods : In this study, we evaluated the bond strength by using 3-point bending test based on ISO 9693 after classified 7 groups-group P : polished with #1200 grit SiC paper, group SS : sandblasted with $50{\mu}m$ aluminum oxides, group LS : sandblasted with $250{\mu}m$ alumium oxides, group HC : treated with 10% hydrochloric acid, group NF : treated with 17% solution of fluoric acid and nitric acid, group SHC : treated with 10% hydrochloric aicd after sandblsting with $50{\mu}m$ alumium oxides, group SNF treated with 17% solution of fluoric acid and nitric acid.
Results:Within the confines of our research, the following results can be deduced. 1. Group SS which was sandblasted with $50{\mu}m$ aluminum oxides showed the highest bond strength of 61.74 MPa and significant differences(P<0.05). The bond strengths with porcelain in groups treated acid etching after sandblasting decreased more preferable than the group treated with sandblasting only. It gives significant differences(P<0.05). 2. After surface treatments, the group treated with sandblasting showed irregular aspect formed many undercuts, in the SEM photographs. The group treated with hydrochloric acid had the sharp serrated surfaces, the group treated with the solution of fluoric acid and nitric acid had the smooth surfaces, the group with sandblasting and hydrochloric acid had irrigular and porous structure, the group with sandblasting and the solution of fluoric acid and nitric acid had crater-like surfaces. But all of the groups treated with acid etching was not found and undercut.
Conclusion:In above results, average surface roughness increase, bond strength also increase, but surface topographs influences more greatly on bond strengths.
키워드
Titanium;Porcelain;Surface treatment;Bond strength
원문 및 링크아웃 정보
등재저널 정보