수중 보관이 접착용 레진의 물리적 성질에 미치는 영향
The Influence of Water Storage on Mechanical Properties of Adhesive Resin
김원찬, 이광원, 이정, 유미경, 김정희,
소속 상세정보
김원찬 ( ) - 전북대학교
이광원 ( Lee Kwang-Won ) - 전북대학교
이정 ( ) - 한국외국어대학교
유미경 ( Yu Mi-Kyung ) - 전북대학교
김정희 ( Kim Jeong-Hee ) - 전북대학교
KMID : 0988720060220020193
Abstract
The Influence of Water Storage on Mechanical Properties of Adhesive Resin Won-Chan Kim, Kwang-won Lee, Jeong Lee, Mi-Kyoung Yu, Jeong-Hee Kim* Department of Conservative Dentistry, School of Dentistry, Chonbuk National University Objective To evaluate the influence of water storage on the mechanical properties of dental adhesives over 1 and 3 months. Materials and Methods Adhesive resin sheets were prepared by pouring either All-bond 2(AB), Clearfil SE Bond(SE) into a mold measuring 15 × 15 × 0.9 mm. After solvent in primer evaporation, the adhesives were light-cured and removed from the mold and divided in two pieces, trimmed to hourglass shape that were used to determine the micro-tensile strength(MTS). Another hourglass shaped metal mold measuring 2.0 × 1.5 mm in cross-section area was made to determine the Young’s modulus(E). Adhesive specimens for Young’s modulus(E) were prepared in the same method. Specimens were stored at 37℃ in distilled water and tested after 1 and 3 months. The data were analyzed by one-way ANOVA and Tukey’s test. Results Water storage significantly decreased the micro-tensile strength(MTS) of AB and SE specimens after 1 and 3 months(P<0.05). The Young’s modulus(E) were also decreased after water storage for 1 and 3 months, but statistically not significant in each group of AB and SE group respectively. Conclusions Long-term exposure of adhesive resin to water can cause reduction of mechanical properties. It may compromise resin/dentin bonds and affect longevity of restorations.
키워드
water storage;adhesive resin;micro-tensile strength;Young’s modulus;mechanical properties
원문 및 링크아웃 정보
등재저널 정보