Novel method of radiographic stent for presurgical evaluation of implant placement: A technical report
주창민, 홍성만, 이영후, 홍성진, 백장현, 노관태, 배아란, 김형섭, 권긍록,
소속 상세정보
주창민 ( Ju Chang-Min ) - 경희대학교 일반대학원 보철학교실
홍성만 ( Hong Sung-Man ) - 경희대학교 일반대학원 보철학교실
이영후 ( Lee Young-Hoo ) - 경희대학교 치과병원 보철과
홍성진 ( Hong Seoung-Jin ) - 경희대학교 치과병원 보철과
백장현 ( Paek Jang-Hyun ) - 경희대학교 치과대학 치과보철학교실
노관태 ( Noh Kwan-Tae ) - 경희대학교 치과대학 치과보철학교실
배아란 ( Pae Ah-Ran ) - 경희대학교 치과대학 치과보철학교실
김형섭 ( Kim Hyeong-Seob ) - 경희대학교 치과대학 치과보철학교실
권긍록 ( Kwon Kung-Rock ) - 경희대학교 치과대학 치과보철학교실
KMID : 1012220200110010007
Abstract
Radiographic stent has been widely used for diagnosing and planning the exact position and direction of implantation. A lot of time is needed when using conventional method (i.e. diagnostic wax up and Omnivac). Recently, the use of 3D printing and CAD software was specialized in the manufacture and design of various dental prostheses. A previous technique using none dental CAD software (Meshmixer, Autodesk, CA, USA) is free but much time is needed for designing a stent. Thus, this technical report proposes a novel method for designing a radiographic stent using dental CAD program (Exocad, Align technology, CA, USA). As a result, a radiographic stent was designed with ease and reduced working time dramatically by using dental CAD program. Also, path of insertion and amount of undercut were set easily. The tooth library in the dental CAD program could be applied to the design easily.
키워드
원문 및 링크아웃 정보
등재저널 정보