Effect of different coloring liquids on the flexural strength of multilayered zirconia
Yu Na-Kyoung, 박미경,
소속 상세정보
( Yu Na-Kyoung ) - Catholic University of Pusan College of Health Sciences Department of Dental Laboratory Science
박미경 ( Park Mi-Gyoung ) - Catholic University of Pusan College of Health Sciences Department of Dental Laboratory Science
Abstract
PURPOSE: The purpose of this study was to evaluate the effect of two coloring liquids (aqueous and acid-based coloring liquids) and the position of multilayered zirconia on the flexural strength of multilayered zirconia.
MATERIALS AND METHODS: The multilayered zirconia specimens were divided into upper and lower positions. The specimens were divided into three subgroups (n=10): non-shaded, acid-based coloring liquid, and aqueous coloring liquid. The specimens were cut using a milling machine and were immersed in either a acid-based coloring liquid or aqueous coloring liquid 2 times for 5 seconds. The specimens were sintered in a sintering furnace according to the manufacturer's introduction. The flexural strength of the specimen was measured using a universal testing machine and the surface of the specimen was observed using a field emission scanning electron microscope.
RESULTS: The flexural strength of multilayered zirconia was 400 ? 500 MPa. There was no statistically significant difference among all groups (P>.05).The flexural strength of the multilayered zirconia was not influenced by the kind of coloring liquid used (P>.05). The flexural strength of the multilayered zirconia colored with the coloring liquids was not influenced by its position (P>.05).
CONCLUSION: The different coloring liquid application did not affect the flexural strength of multilayered zirconia of all positions.
키워드
Multilayered zirconia; Coloring liquid; Flexural strength
원문 및 링크아웃 정보
등재저널 정보